- Oct 27, 2013
- 26
Hello All,
Long time lurker, infrequent poster here. I was poking around in my Pentair system and noted that we are running FW 1.170 where as the latest firmware is 1.190. I have already found and read through the thread telling me how to update the FW (including the programmers needed, the cables, adapter board, etc.). However, I still had some questions and after looking around the Pentair site I could not find any good info and updating the firmware so I was hoping to get some more info here.
1. Is there a readme or a history file of what is fixed with the firmware? I found one thread mentioning a correction to dates past 2020 but is that the only fix?
2. I wanted to verify that when people speak of Indoor vs. Outdoor board what is being referred to is the remote control (indoor) and the panel by the equipment (outdoor), correct?
3. What is the difference between Trainer and (I guess) non-trainer? In some posts I saw a reference to this and looking at the files available on the Pentair site I see a set of files (Indoor/Outdoor) for FW 1.90 for Intellitouch Trainer and one set simply for Intellitouch. All the files have the same size but the CRCs are different between the Trainer/Non-Trainer version so the FW code must be different. How do I know which to use? Is there an advantage to one vs. another?
My system: Intellitouch i9+3, Controller FW: 1.170, ScreenLogic with Protocol Adapter 5.2 Build 738.0 and matching configurator
TIA!
Long time lurker, infrequent poster here. I was poking around in my Pentair system and noted that we are running FW 1.170 where as the latest firmware is 1.190. I have already found and read through the thread telling me how to update the FW (including the programmers needed, the cables, adapter board, etc.). However, I still had some questions and after looking around the Pentair site I could not find any good info and updating the firmware so I was hoping to get some more info here.
1. Is there a readme or a history file of what is fixed with the firmware? I found one thread mentioning a correction to dates past 2020 but is that the only fix?
2. I wanted to verify that when people speak of Indoor vs. Outdoor board what is being referred to is the remote control (indoor) and the panel by the equipment (outdoor), correct?
3. What is the difference between Trainer and (I guess) non-trainer? In some posts I saw a reference to this and looking at the files available on the Pentair site I see a set of files (Indoor/Outdoor) for FW 1.90 for Intellitouch Trainer and one set simply for Intellitouch. All the files have the same size but the CRCs are different between the Trainer/Non-Trainer version so the FW code must be different. How do I know which to use? Is there an advantage to one vs. another?
My system: Intellitouch i9+3, Controller FW: 1.170, ScreenLogic with Protocol Adapter 5.2 Build 738.0 and matching configurator
TIA!
Last edited: