Pentair Intelliflo VSF Power Outage

[calculus]

Hi, I had a power outage at my house and now my Pump is turning On and Off by itself.

I already turned off the breaker for five minutes and reset the scheduling. The Pump is still turning On and Off by itself.

I can’t identify the problem. Any suggestions?

 

[ajw22]

Is your VSF pump controlled by automation?

What is displayed on the pump control panel when the pump shuts off?

 

[calculus]

Is your VSF pump controlled by automation?

What is displayed on the pump control panel when the pump shuts off?

Yes, the VSF Pump is controlled by automation.

The display on the pump is controlled by automation unless is put the Pentair automation panel on Service.

 

[Jimrahbe]

C,

What specific automation system do you have?

If you have an EasyTouch, push the reset button on the front panel.. This will reboot the system, just like you reboot your PC..

You can also pump the system in the Service mode and see if the problem stops or continues. It it continues, it should be a pump issue, if it stops then it should be an automation issue.

Thanks,

Jim R.