Pentair intellibrite 5G LED 12V switching options

[fldrummer79]

Hello, I'm currently installing an easy touch 4 relay automation panel with screen logic 2 and I plan on controlling a new intellibrite 12V LED light with it. There is a light switch on my patio that used to control the old light. My question is, can I hook up both the light switch and the easy touch? It may be more convenient to use a light switch vs. a phone app to turn the light on/off depending on the situation.
Thanks

 

[Jimrahbe]

79,

Doubtful...

You'd need to wire it as a three way switch and use a 2-speed pump style relay in the EasyTouch. This would most likely involve running a new wire between the old light switch and the EasyTouch.

As a side note, I use my PC and ScreenLogic about 95% of the time. It works better has better displays and programming is easier. I rarely use the phone app.

Thanks,

Jim R.

 

[fldrummer79]

Thank you Jim. I'm already running wire for the panel, so now would be the time to do it.