I have an IC40 connected to an Easytouch with Screenlogic2. I saw the Low Salt light was on Friday. I checked the interface and Salt was showing at 2650. I did my own test with the Taylor kit from TFTestkits and got a salt level of 3600. I know the salt sensor is supposed to be +/- 500ppm, but this was a bit more than that. For now I added one bag of salt bringing it up to 2900 on the IC40 and 3800 with the Taylor Test kit, which removed the low salt warning. The salt indicator was working well for the past month with my salt level a bit high at 3800-4000 before we got a lot of rain in the past two weeks.
Does the salt cell need to be cleaned?
I am weary of doing this as last time I cleaned it the flow sensor stopped working...
TIA for any suggestions
Does the salt cell need to be cleaned?
I am weary of doing this as last time I cleaned it the flow sensor stopped working...
TIA for any suggestions