I’m on my second Ic 60. Installed the new unit with new power less than one year ago, it is quite a bit more quirky than my previous IC 60.
problem I’m having now, is the flow light glows red even with more than adequate water flow. I back washed, cleaned the spines of the unit and checked the various lines for obstructions. Water flow itself is not my problem. the thing with the unit will occasionally register no flow with plenty of flow. Also tried cutting the power source for 24 hours, hoping that would be a hard reset. Anyone have any suggestions as to why this is or what I can do about it? Thanks, sr
problem I’m having now, is the flow light glows red even with more than adequate water flow. I back washed, cleaned the spines of the unit and checked the various lines for obstructions. Water flow itself is not my problem. the thing with the unit will occasionally register no flow with plenty of flow. Also tried cutting the power source for 24 hours, hoping that would be a hard reset. Anyone have any suggestions as to why this is or what I can do about it? Thanks, sr