I have a SR400NA MAX-E-THERM POOL AND SPA HEATER from Pentair. The heater is currently connected via 2-Wire Control (i.e. the Fireman’s Switch) to an IntelliTouch control system. This provides only limited on/off control and requires manual spa/pool and temperature control.
I believe I can configure this system for remote control and monitoring by connecting the heater’s RS-485 COM port to the IntelliCenter Control System COM port. Has anyone succeeded in doing this?
I believe I can configure this system for remote control and monitoring by connecting the heater’s RS-485 COM port to the IntelliCenter Control System COM port. Has anyone succeeded in doing this?