I am a reasonably intelligent person, but I can't get this darn system to work. I am comfortable with the electrical stuff and am computer competent. Despite my forum reads and manual perusals, I still can't get my EasyTouch set up correctly. Can anyone help me get my pool up and running please? Here is the system I have:
Components:
Pentair EasyTouch 8 with IC40 Intellichlor
Intelliflo XF
Max-E-Pro 1.0 HP
Max-E-Pro 0.75 HP
Sta-Rite Max-E-Therm 333 heater
Jandy 3 Port valves
Jandy Valve actuators
Clean and Clear filters
Pentair Wireless remote
Intellibrite lights
Magic Stream laminars
The Intelliflo XF pump is connected directly to the breaker and the EasyTouch COM port. 1.0 HP pump connected to Aux 1 relay. 0.75 HP pump connected to Aux 2 relay. Valve actuators connected to valves 1-3. Wireless remote controller connected to COM port. Heater connected to heater jumper.
Here are the modes or scenarios I am trying to create:
Components:
Pentair EasyTouch 8 with IC40 Intellichlor
Intelliflo XF
Max-E-Pro 1.0 HP
Max-E-Pro 0.75 HP
Sta-Rite Max-E-Therm 333 heater
Jandy 3 Port valves
Jandy Valve actuators
Clean and Clear filters
Pentair Wireless remote
Intellibrite lights
Magic Stream laminars
The Intelliflo XF pump is connected directly to the breaker and the EasyTouch COM port. 1.0 HP pump connected to Aux 1 relay. 0.75 HP pump connected to Aux 2 relay. Valve actuators connected to valves 1-3. Wireless remote controller connected to COM port. Heater connected to heater jumper.
Here are the modes or scenarios I am trying to create:
XF pump | 1.0 HP pump | 0.75 HP pump | Heater | Valve 1 | Valve 2 | Valve 3 | |
Filter | 1800 | Off | Off | Off | Right | Right | n/a |
Infinity | 3250 | Off | Off | Off | Left | Left | Left |
Jets only | Off | On | Off | On | n/a | n/a | Right |
Water Features | n/a | n/a | On | n/a | n/a | n/a | n/a |
Infinity + Jets | 3250 | On | Off | On | Left | Left | Right |
Infinity + Features | 3250 | Off | On | Off | Left | Left | Left |