So, I guess I'll start with how this all happened. The pool was working fine this morning, until I went to replace the receiver. I found out it was a bad wire, so I put the old receiver back on it and the pool lights started flickering, and the pumps went haywire. Then I pulled the power breaker and I removed the receiver . After that, the main pump wouldn't turn on, but the waterfall wont turn off. So, I pressed reset and valve and that turned the main pump on and the waterfall was still on. So I tried pulling the power on the whole thing again, now I just had a blank LCD screen. So, I tried to reset the 3 amp relays I pulled the white switch down and the white piece popped out, now I have no screen and no power. I have no idea what to do. I am hoping someone can help me here? I'm lost and I hope the whole thing isn't shot because I replaced a receiver.
Last edited by a moderator: