Pentair Easy Touch help

[Maranello]

Moved from Here

It sounds like your controller lost the wireless address.

Try this:
At the outdoor control
1.press menu
2.press down button, scroll to settings.
3.Press right button to select.
4.Press up button, scroll to "Wireless Address"
5.Press right button to select.
"Address Wireless scanning" will display, Then "Sending Address" will display.
6.Now repeat steps 1-5 with the handheld wireless controller, "Address Found" will display
7.Press menu button on control panel 3 times to return to main screen.

Hello,

I was reading your post and have done as you say. Power down using cricuit from the pool eqipment. Selected Settings> WIreless Addr > Select right arrow then starts "" Address Lock Searching... Please wait.
It searches for address forrever but can't find it. Antena seems OK. has 3 lights and all are flashing (assume it is normal) Any suggestions?
Thanks in advance!

 

[Jimrahbe]

M,

Let's see what Tom has to say.. Calling @ogdento

Thanks,

Jim R.

 

[ogdento]

which antenna card do you have, does it have a Linx or a Laird chipset?

on the newer Laird cards, it's a bad sign if all three are flashing at the same time, in a repeating pattern like 6 flashes, pause, 6 flashes, pause, etc.

the 485 led should blink once a second or so when it gets a command from the outdoor board.
the rf led will blink when it receives a command from a remote
the power led should be always on