Theizzy

In The Industry
Aug 13, 2024
2
Woodbury, CT
Looking to replace logic board 521107
After lightning strike.
It can be a used complete unit from which I could take out the board.
For some reason Pentair doesn’t have it in the market anymore.
If anybody knows where I could get one please Let me know asap. Thanks.
 
pm sent...

i don't know what other devices you've got on your system, but if you're sure the outdoor board is dead it can usually be repaired. the 8-pin comm chip is labelled U5 and is most likely either a MAX1483ESA+ or an ISL81483IBZ
 
Thank you.

My circuit was damaged by lightning (I am told).
This is discontinued by Pentair (!!!) and it’s impossible to find a replacement panel. (If you know where I can buy one Let me know)

Finally found one, but it doesn’t work the Spa mode (?!?!). If anybody has any idea Let me know.

Lastly and most importantly, it doesn’t communicate with the wireless device (which is why I did the upgrade in the first place)
In watching some video, I noticed that it mentioned that the antenna and the panel need to have same ID.

How can it be if I bought separate panel? And it is not sold these days as a kit with the antenna.
How do I make it work with the antenna I have or how do I get an antenna to work with my new panel board?

Very frustrated
 
Theizzy, just so everybody knows what you've got...
1. You've still got a compool-to-Easytouch upgrade board, right?
2. Do you have an indoor panel as well as the wireless remote?
3. Which outdoor transceiver card do you have - does it have a Laird or Linx chipset? see the pics in this post:
4. Have you checked the cable from the outdoor board to the transceiver card?

(fyi, I sent you a pm a few weeks back but never got a reply)
 
  • Like
Reactions: Jimrahbe