Paramount 004-302-4408-00 Six Port Water Valve Module wont work

sunny8088 · Dec 16, 2017

All,

I installed this may be 1.5 yrs back.

1. New O ring with Lube
2. Switch on RUN
3. Cleaned the unit
4. Pressure @ 20 on Unit

Still i wont rotate the base valves.

Help

Thanks and Merry Christmas.

kadavis · Dec 16, 2017

Take the module out and turn over and try turning impeller and see if gears are moving on top. Also take the lid and make sure when you move the run/pause knob it turns inside

sunny8088 · Dec 28, 2017

I took it out & turned the impeller , it does move gears.
Also checked the run switch & works inside.

Can I remove the module & put the cap back !! will it open up all valves together ?

kadavis · Dec 30, 2017

Yes you can, it should. Is there a gauge on the valve lid? If there is what is the reading at the valve

sunny8088 · Dec 31, 2017

Thanks , pressure is 15-19 .

kadavis · Jan 2, 2018

http://www.1paramount.com/wp-content/uploads/2017/03/041715HomeOwnersManual.pdf

sunny8088 · Jan 2, 2018

All Paramount nozzles are sized and placed specifically for your
pool by Paramount. These nozzles have different sized open
-
ings and if removed, should be returned to the same location.
NOTE: Switching nozzle(s) location will result in poor cleaning
and could severely damage your pool equipment.

What is the meaning of same location ?