Hello. This year we had the hydromassage motor fixed after like 10 years not being used. What happened is one of the 4 jets is weak. The hydromassage has it’s own pump. Skimmers etc are all on a different pump. I guess there could be clogging in the line of that jet but how can I declog?
One Hydromassage jet of total four weak
- Thread starter chrizx74
- Start date
- Jul 21, 2013
- 53,045
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Many jets are adjustable at the jet by turning the face or nozzle.
Being unused for that long it could have any number of things inside the pipes. Is there anything else you have noticed?
Being unused for that long it could have any number of things inside the pipes. Is there anything else you have noticed?
Jets are on the sides of the stairs on the right in this picture.
Nozzle completely open still weak. Didn’t notice anything else. As I said the hm is attached to a different pump, not attached to the filtration system.