33' above ground using a sand filter system that I run continuously, utilizing 12% liquid chlorine, with very little bather load.
It seems like I am going through an unusually high amount of chlorine daily to keep chlorine level at recommenced ppm. I have been following TFP system for a couple of years, but I am missing something this time. Last night, FC= 0, at midnight I added 1 gallon of 12% chlorine to my pool. These are the reading I took this morning at 7:45 am before work. Water is clear and beautiful. Within 24 hours FC will be back to 0. I am using the pool calculator to add correct amount of chlorine early each morning. Targeting FC=5ppm
FC=4.6
CC=.4
PH=7.6
TA=110
CYA=35
What am I overlooking?
It seems like I am going through an unusually high amount of chlorine daily to keep chlorine level at recommenced ppm. I have been following TFP system for a couple of years, but I am missing something this time. Last night, FC= 0, at midnight I added 1 gallon of 12% chlorine to my pool. These are the reading I took this morning at 7:45 am before work. Water is clear and beautiful. Within 24 hours FC will be back to 0. I am using the pool calculator to add correct amount of chlorine early each morning. Targeting FC=5ppm
FC=4.6
CC=.4
PH=7.6
TA=110
CYA=35
What am I overlooking?