Ohhhhh...
- Thread starter Casey
- Start date
RookiePick
Well-known member
I'm not sure I follow the intent of what you are trying to do 
I thought SWG was to be left off during SLAM as it is unlikely to be able to satisfy FC demand.
If you are still slamming?
I thought SWG was to be left off during SLAM as it is unlikely to be able to satisfy FC demand.
If you are still slamming?
You can use a clamp ammeter to measure the amperage and multiply it by the voltage to get watts.
I'm not SLAMing. I just got over one. I have had to SLAM twice because my SWG isn't working n my PB says it is. So I'm done SLAMing just to prove to him next week my SWG is not working.I'm not sure I follow the intent of what you are trying to do
I thought SWG was to be left off during SLAM as it is unlikely to be able to satisfy FC demand.
If you are still slamming?
JupiterFL
Silver Supporter
- Mar 28, 2023
- 128
- Pool Size
- 12638
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
RookiePick
Well-known member
I think @Casey did and gained 0.5ppm. which is way unders for her cell/pool size at 100%, if she is not battling anything that would be consuming FC in the dark.
She's short at least 2ppm FC by pool math (should add approx 2.8ppm every 8 hours at full noise) on her 1.2lb/day AP1400.
EDIT - MY BAD. I THINK CASEYS CELL IS ONLY THE 0.92lb/day CELL. She is still well short on overnight FC gain though
Last edited:
Well, I checked FC Yesterday evening and I'm still at 22ppm. So I believe it's safe to say that my SWG is working.
RookiePick
Well-known member
Did you change anything from where you were were the other day 100% output, pump 24/7?
Nothing. I just let it go. Only true difference was not removing my solar blanket because I've been working last 4 days.