Looking for some advice. Using sand filter as shown in my signature. We have a pool that's unfortunately partially positioned under a big tree. We have also had iron problems in the past with the well water.
About a week ago we finally passed the OCLT and I've kept the chlorine high all week because it's at the grandparents and some days I don't make it over to clean.
Water has made a ton of progress, today is almost perfectly clear (see attached -- this is right before I vacuumed so there's stuff on the bottom but it's not cloudy)

Problem is it's been stalled at this color for a few weeks as clarity has cleared up.
Last week I ran it through a polyfill bucket overnight and to my surprise the polyfill didn't fill with rust as it did years past.
I'm wondering if this might be pollen that I'm dealing with. Here's a pic from my pool last year at around the same time of year:

Any ideas? Should I try poly fill again?
I know it's sacrilegious but I added an oz of clarifier to give the filter a little boost.
Obligatory test results:
FC 13
CYA 40
PH 7.6
TA 70
About a week ago we finally passed the OCLT and I've kept the chlorine high all week because it's at the grandparents and some days I don't make it over to clean.
Water has made a ton of progress, today is almost perfectly clear (see attached -- this is right before I vacuumed so there's stuff on the bottom but it's not cloudy)

Problem is it's been stalled at this color for a few weeks as clarity has cleared up.
Last week I ran it through a polyfill bucket overnight and to my surprise the polyfill didn't fill with rust as it did years past.
I'm wondering if this might be pollen that I'm dealing with. Here's a pic from my pool last year at around the same time of year:

Any ideas? Should I try poly fill again?
I know it's sacrilegious but I added an oz of clarifier to give the filter a little boost.
Obligatory test results:
FC 13
CYA 40
PH 7.6
TA 70