My pump is no longer leaking but the there doesn't appear to be any power going to the iaqualink. I'm guessing I pulled the wire accidentally when contorting around my tight equipment space
These wires appear to be the problem. They are very weathered so I labeled what I believe the colors to be.
in the close up of #3 area, it looks like maybe the wires were coated with something blue? maybe to protect from the weather? Because if I look close left to right, it looks like black, green, red, yellow. the red wire is broken
So it looks to me like
Green to green
Yellow to blue
Red to orange?
Black to brown?
And I have no idea what the terminals (or if that's the right word) circled in green are called. or how the wires get put into it.
EDIT they are cable butt splice connectors on amazon
I'm not sure how to tell which work for this particular wire set up, wire gauge and any other parameters. Trying to figure it out!
EDIT #2 The blue cable goes to the control panel. The almond colored wire is wired to my house. Why couldn't I wire the almond cable directly into the harness that goes into the panel? Picture three. Using the colors paired above? So the red wire would go into the terminal at the #1 spot? Is there a reason the wires in the blue cable have white wires twisted together? Does the terminal at the control panel need two wires in each spot?
Advice? or pointers to help?
Thank you
Marci
These wires appear to be the problem. They are very weathered so I labeled what I believe the colors to be.
in the close up of #3 area, it looks like maybe the wires were coated with something blue? maybe to protect from the weather? Because if I look close left to right, it looks like black, green, red, yellow. the red wire is broken
So it looks to me like
Green to green
Yellow to blue
Red to orange?
Black to brown?
And I have no idea what the terminals (or if that's the right word) circled in green are called. or how the wires get put into it.
EDIT they are cable butt splice connectors on amazon
I'm not sure how to tell which work for this particular wire set up, wire gauge and any other parameters. Trying to figure it out!
EDIT #2 The blue cable goes to the control panel. The almond colored wire is wired to my house. Why couldn't I wire the almond cable directly into the harness that goes into the panel? Picture three. Using the colors paired above? So the red wire would go into the terminal at the #1 spot? Is there a reason the wires in the blue cable have white wires twisted together? Does the terminal at the control panel need two wires in each spot?
Advice? or pointers to help?
Thank you
Marci
Attachments
Last edited: