Hoping Pool Clown can help with this issue. Salt water pool 6 years old. Water level and flow are fine but Aquapure Zodiac system keeps blinking no flow. I have cleaned filter and salt cell. I noticed one panel on cell was all chewed up and swapped it out for a full panel. I have read many posts and they all talk about a flow sensor. I can't seem to locate mine unless it's internal somewhere. Just cleared an algae issue and would really like the system to run to keep the water clear.
No Flow on my Zodiac Aquapure Ei
- Thread starter Allied16
- Start date
Tried all sorts of troubleshooting but can't seem to get it to stop restarting because of the "no flow". Water is running and filter is clean.
- Jul 21, 2013
- 52,207
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
- Jul 21, 2013
- 52,207
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Pool Clown
In The Industry
I would not try the repair in the video as it would probably just get an extension of time and eventually the error will return. Your cell being 6 years, you got your moneys worth...