Hello all. Very happy to have stumbled onto this site.
We have a SWG swimming pond (pool) and are beginning the journey to take control of our pool and get away from our local pool store.
We just did our yearly "reset"- drain, pressure wash, refill, start over- after coming out of winter here in Central Oregon. We used all the recommended chemicals from the local pool store (hadn't found TFP yet) and levels seem to be in the rough ballpark using the test strips we have. I have ordered the TFP recommended test kit and am waiting for it to arrive so we can start to get more accurate numbers on our own.
In the past, we have struggled with algae blooms and high pH. We used to struggle with chlorine levels, but I think it was because our salt cell was too small for our pool. It seems to be holding better now.
So while waiting for our test kit to arrive so that I can get some "where do we go from here" advice, I'd like to get the app figured out. Does anyone know if there is a tutorial somewhere showing all the features and how best to utilize it? I am hoping that I can use it to track test results, and then have it tell me how much of each chemical needs to be added?
Any help would be greatly appreciated!
We have a SWG swimming pond (pool) and are beginning the journey to take control of our pool and get away from our local pool store.
We just did our yearly "reset"- drain, pressure wash, refill, start over- after coming out of winter here in Central Oregon. We used all the recommended chemicals from the local pool store (hadn't found TFP yet) and levels seem to be in the rough ballpark using the test strips we have. I have ordered the TFP recommended test kit and am waiting for it to arrive so we can start to get more accurate numbers on our own.
In the past, we have struggled with algae blooms and high pH. We used to struggle with chlorine levels, but I think it was because our salt cell was too small for our pool. It seems to be holding better now.
So while waiting for our test kit to arrive so that I can get some "where do we go from here" advice, I'd like to get the app figured out. Does anyone know if there is a tutorial somewhere showing all the features and how best to utilize it? I am hoping that I can use it to track test results, and then have it tell me how much of each chemical needs to be added?
Any help would be greatly appreciated!