- Sep 5, 2020
- 392
- Pool Size
- 22000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
New pool completed 3 weeks ago.
I noticed a weird thing going one with my smaller pump used for the sheer descents.
Unlike my main pump which holds water to top even when pump is off, this smaller pump starts to slowly drain down and I see air bubbles coming out from one side of the pipe. It's like 1 bubble every 10 seconds or so and the water drains down past that pipe and to the bottom, maybe 4 inches of water remains in pump when it's all said and done . I believe it's the suction side of pump where the bubbles are coming from.
Pump is higher than the pool but not sure that matters as my larger main pump doesnt drain down and it sits higher than pool as well.
I asked the chemical start up guy 2 days ago at the final pool school orientation and he said as long as it primes up, your good. Me, I am thinking it's some sort of leak as I've had some bad (VERY) bad luck with this pool build/builder.
Any ideas folks? Pic below, I have a video but it seems too large to post. Thank you.
I noticed a weird thing going one with my smaller pump used for the sheer descents.
Unlike my main pump which holds water to top even when pump is off, this smaller pump starts to slowly drain down and I see air bubbles coming out from one side of the pipe. It's like 1 bubble every 10 seconds or so and the water drains down past that pipe and to the bottom, maybe 4 inches of water remains in pump when it's all said and done . I believe it's the suction side of pump where the bubbles are coming from.
Pump is higher than the pool but not sure that matters as my larger main pump doesnt drain down and it sits higher than pool as well.
I asked the chemical start up guy 2 days ago at the final pool school orientation and he said as long as it primes up, your good. Me, I am thinking it's some sort of leak as I've had some bad (VERY) bad luck with this pool build/builder.
Any ideas folks? Pic below, I have a video but it seems too large to post. Thank you.