New Pool Build in Mckinney Texas
- Thread starter chadweiss
- Start date
Sorry. Its WetEdge Serenity- Mystical Breeze.
Here is an example.
https://www.facebook.com/BurkettsPoolPlastering/photos/ms.c.eJw9zNsNwEAMAsGOIvzAPvpvLJIT3~_~_IxRpQEx7hZYzHBvL0QJ0fiA~;yQpgkb2GBNgvkfuQkjk2SXUUx7AWKIRfg.bps.a.1700014026755586.1073741829.100429503380721/1700975023326153/?type=3&theater
Here is an example.
https://www.facebook.com/BurkettsPoolPlastering/photos/ms.c.eJw9zNsNwEAMAsGOIvzAPvpvLJIT3~_~_IxRpQEx7hZYzHBvL0QJ0fiA~;yQpgkb2GBNgvkfuQkjk2SXUUx7AWKIRfg.bps.a.1700014026755586.1073741829.100429503380721/1700975023326153/?type=3&theater
Post plaster. Couldn't get a good picture close up. Maybe tomorrow. Acid was first thing in the morning and then fill time!!
Landscape and torches come mid week!!
Inching closer!!
Landscape and torches come mid week!!
Inching closer!!
Here is your job for the fill:
-put socks or a cloth over the ends of the hoses. This will protect the new plaster from being scratched/marred and help filter the water some.
-Put the hoses RIGHT on the main drain so there is not "river" of water running down your new plaster. If not main drain put it at the lowest spot in your pool.
-fill the spa last as you do not want to take a chance of it running over yet.
-Do NOT stop the fill water for any reason!!!!!!! Once you start filling keep it going! If you need to slow it down that is okay but not by too much. We had one pool where they stopped the water for the night and it caused a dark ring around their new plaster
Kim
-put socks or a cloth over the ends of the hoses. This will protect the new plaster from being scratched/marred and help filter the water some.
-Put the hoses RIGHT on the main drain so there is not "river" of water running down your new plaster. If not main drain put it at the lowest spot in your pool.
-fill the spa last as you do not want to take a chance of it running over yet.
-Do NOT stop the fill water for any reason!!!!!!! Once you start filling keep it going! If you need to slow it down that is okay but not by too much. We had one pool where they stopped the water for the night and it caused a dark ring around their new plaster
Kim
Thank you Kim!!
On the deck, we went with stamped concrete with a slate pattern. We had an exisiting patio they couldn't match. So between the old and new there is an expansion joint of flagstone between the two.
On the deck, we went with stamped concrete with a slate pattern. We had an exisiting patio they couldn't match. So between the old and new there is an expansion joint of flagstone between the two.
I'm also considering stamped concrete. Did you have the concrete dyed first? Are you concerned with it being slippery when wet?
My patio was done while mixing. The pool was done after it was laid. As long as its not sealed, it won't be slipperu.
- Oct 18, 2009
- 3,648
- Pool Size
- 6000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
I love how you did the border between the two places! We just did the same thing in our hallway. If you can't match it then do it up big and pretty. Well done!
Kim
Kim
- Oct 18, 2009
- 3,648
- Pool Size
- 6000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
You mean the adults section of the pool?
How did you know that I was talking about it
Also great place to watch TV fromSo pool us filled and start up happened today. Landscaping should be tomorrow.
However with two steps forward, there always seems to be one step back.
So when the deck was poured, the jig for the diving board didn't make it. Also, somehow, they poured over the autofill valve. So guess how gets his new concrete cut up already!!? Ugggg
However with two steps forward, there always seems to be one step back.
So when the deck was poured, the jig for the diving board didn't make it. Also, somehow, they poured over the autofill valve. So guess how gets his new concrete cut up already!!? Ugggg
WHAT???? How, just how..............do they pour OVER something like that?? The board jig I can almost understand but........pouring over the valve?? Gurrrr
- Oct 18, 2009
- 3,648
- Pool Size
- 6000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)