- Sep 11, 2020
- 57
- Pool Size
- 18500
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Truclear / Ei
- Just subscribed to the Pool Math App - You should see the link
- Have most of my levels in line with a few exceptions (see below)
- Set up my SWG at 50% with the pump flowing 24hrs and staying in between 4-6 ppm Free Chlorine
- Bought a FAS DPD test for chlorine
- Learned that 40# of salt raises my levels ~275 ppm and testing with a calibrated meter fluctuates between 3000 and 3200
- My CYA is about 25-30 all I have is test strips for that. What should I use for more precise tests or are the strips good enough. I don't want to over stabilize
- If the pump is on above the flow rate for the SWG it does not matter how fast it goes, right? You don't get more chlorine generated at 2750 RPM than at 1000.
- Do I need to SLAM or shock a pool that stays in that 4-6ppm FC range? Maybe just after heavy rain or parties?
- If I raise my CYA will I have to adjust the current 50% output of my SWG to hit the right ratio of FC or will it stabilize?
- What do I need to do to test Calcium Hardness? The test the PB gave me does not have one. I planned to use up that test kit and then get a K2005.
Last edited: