Regarding the salt cell, no it was on and connected for most of this process, until maybe a week and a half ago. The prior message was always either "Purifier off check flow" or "add 488 lbs salt". Once I added some salt is said this same message. At first I assumed it was because of low salt in the pool as I only added enough to get up to 2800ppm. But now at 3400 ppm it still says the same thing.Should be lots of Youtube vids on doing gel coat.. I used to do it to my older fiberglass kayaks. You can paint it with a brush, but it comes out smoother if you spray it on.
As to the SWG cell...is this the first time you turned it on? I can't recall
Here are test results from lunch and pics of the current test results.
Attachments
-
E39272D3-425A-4EDE-8EE1-FFCF76B37A16.jpeg592.8 KB · Views: 71
-
03CDDA7C-2D74-4436-8906-07EB821410E1.jpeg607 KB · Views: 71
-
1D780888-290C-4367-866F-F523F0AEEBB4.jpeg623.4 KB · Views: 70
-
B3B32CEF-F1B8-4004-9372-3F47FAC7AA47.jpeg595.5 KB · Views: 69
-
A80FA28C-3F76-4190-91D0-B9F05BF8FA81.jpeg555.6 KB · Views: 73
-
BC647E2F-6D6C-4D77-A91F-B5B4A3A79C9E.jpeg482.8 KB · Views: 73
-
68E99A9B-207C-47C4-8F82-C60DE8F7F27C.jpeg55.5 KB · Views: 69
Last edited: