Our new pool was completed a little over a month ago. I have a question on how the spa is supposed to operate. On the Omnilogic app in the Spa section there are the following options; Filter Pump, Heater, Blower and Lights. My question is regarding the Pump and Blower options. When the filter pump is turned on in spa mode, the water pressure coming out of the jets feels the same as the pressure coming out of the pool return jets when the filter pump is turned on in pool mode. To get that jacuzzi type pressure I need to turn on the blower, unfortunately in that mode, the pressure is so high if you are sitting in front of one of the jets water just shoots all over the place, and escapes out of the spa. Is that how it is supposed to work, sort of an all or nothing experience, is there no middle ground. I was hoping to get that jacuzzi type pressure with just the filter pump turned up to high. I don't want to have to use the blower, the water is so violent and loud in that mode, not very relaxing. Attached is a picture of the type of jets I have, they are simple screw on types just like a pool return, they don't have any internal mechanisms. They are simple waterway spa rotating eyeballs.
If I can't expect to get the jacuzzi type pressure from the pump I wonder if the blower could be dialed back. On the Omnilogic the pump can be adjusted from 0-100%, the blower is only on/off.
I have the Hayward 1.85 THP Variable Speed Pump. Maybe there is a setting that can be adjusted or maybe the Hayward tech can reprogram the board?
If I can't expect to get the jacuzzi type pressure from the pump I wonder if the blower could be dialed back. On the Omnilogic the pump can be adjusted from 0-100%, the blower is only on/off.
I have the Hayward 1.85 THP Variable Speed Pump. Maybe there is a setting that can be adjusted or maybe the Hayward tech can reprogram the board?
Attachments
Last edited: