New Build - Texas
- Thread starter agjag06
- Start date
johnpkaiser
Bronze Supporter
==========================================
Pool
------------------------------------------
Build Type: Plaster
Volume: 13800 gallons
------------------------------------------
Latest Test Result Summary:
FC: 0.0 (2 hours ago)
CC: 0.0 (2 hours ago)
pH: 6.8 (2 hours ago)
TA: 0 (2 hours ago)
CH: 125 (2 hours ago)
CYA: 0 (2 hours ago)
TEMPERATURE: 85° (2 hours ago)
CSI: -Infinity (2 hours ago)
==========================================
So the PM for the PB obviously isn’t following a plaster startup procedure. Dumped 2 gallons of MA last night and came back today, used a garbage strip and dumped another gallon of MA and half a small bucket of CYA into the skimmer. Gotta go clandestine and follow the NPT startup procedure. Added 3 lbs of baking soda tonight which was all I had after they cratered the TA and pH. Will get more tomorrow. Added 1 gallon of 10% chlorine to try to stay ahead of any algae bloom. Figured out all the manual valves and relay buttons on the easy touch to survive until ScreenLogic programming. Suctioned out leaves and dust also. Gonna focus on getting TA and then calcium right as NPT recommends.
Pool
------------------------------------------
Build Type: Plaster
Volume: 13800 gallons
------------------------------------------
Latest Test Result Summary:
FC: 0.0 (2 hours ago)
CC: 0.0 (2 hours ago)
pH: 6.8 (2 hours ago)
TA: 0 (2 hours ago)
CH: 125 (2 hours ago)
CYA: 0 (2 hours ago)
TEMPERATURE: 85° (2 hours ago)
CSI: -Infinity (2 hours ago)
==========================================
So the PM for the PB obviously isn’t following a plaster startup procedure. Dumped 2 gallons of MA last night and came back today, used a garbage strip and dumped another gallon of MA and half a small bucket of CYA into the skimmer. Gotta go clandestine and follow the NPT startup procedure. Added 3 lbs of baking soda tonight which was all I had after they cratered the TA and pH. Will get more tomorrow. Added 1 gallon of 10% chlorine to try to stay ahead of any algae bloom. Figured out all the manual valves and relay buttons on the easy touch to survive until ScreenLogic programming. Suctioned out leaves and dust also. Gonna focus on getting TA and then calcium right as NPT recommends.
