- Jan 7, 2012
- 2,123
- Pool Size
- 21000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
New Build in The Woodlands TX - Update: Landscaping!
- Thread starter pjt
- Start date
- Jan 7, 2012
- 2,123
- Pool Size
- 21000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Equipment pad. A few too many 90 degree turns (in my opinion) to build the heat pump bypass.
Looking good. Where is that outside 65 inch screen going to be placed? In the main patio or the new shade pavilion?
- Jan 7, 2012
- 2,123
- Pool Size
- 21000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
I think I'll give my bank account a break before shopping for an outdoor TV.
The privacy wall of the shade pavilion is reinforced to support the weight of a flatscreen, so it will most likely go there.
- Jan 7, 2012
- 2,123
- Pool Size
- 21000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
3 GFCI protected electrical boxes with 2 outlets each, for a total of 6. One box is mounted high above the privacy slats for a flatscreen TV and Christmas lights.
Black Friday is a month away - bound to be great deals then. Good Luck. A neighbor has a plastic bed cover that he fit over his TV when not in use or expected bad weather. Just an idea for you to consider.I think I'll give my bank account a break before shopping for an outdoor TV.
The privacy wall of the shade pavilion is reinforced to support the weight of a flatscreen, so it will most likely go there.
- Jun 11, 2018
- 388
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
I see three scuppers above the bench. What is the length of the wall above the bench and the length of the scuppers?
- Jan 7, 2012
- 2,123
- Pool Size
- 21000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
- Jan 7, 2012
- 2,123
- Pool Size
- 21000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
For the center water feature, the height of the wall is 24" and is around 10 feet long. The center scupper is 18" and the flanking scuppers are 12".
- Sep 3, 2018
- 1,335
- Pool Size
- 17000
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
- Jan 7, 2012
- 2,123
- Pool Size
- 21000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Pebble Sheen Blue Surf. It looks much better/darker when wet. They're finishing up day two today.
TampaKathy
Gold Supporter
The skimmer cover matches perfectly...is that a HIDE skimmer cover? Pouralid? something else, lol.
- Jan 7, 2012
- 2,123
- Pool Size
- 21000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
The skimmer cover matches perfectly...is that a HIDE skimmer cover? Pouralid? something else, lol.
They drilled a hole in each of the travertine tiles that cover the skimmers.
- Jan 7, 2012
- 2,123
- Pool Size
- 21000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Day two of plaster is complete. Filling with water today.
I checked the water meter before starting the fill to get total water volume and "checkpoint" water volumes (at the steps, etc.) in case I need a partial drain sometime in the future.
My dog wanted to check their work.
I checked the water meter before starting the fill to get total water volume and "checkpoint" water volumes (at the steps, etc.) in case I need a partial drain sometime in the future.
My dog wanted to check their work.
Because you have a free form pool , if you can put a tape measure (I have a wooden 4 ft ruler - not sure where I got that) and take measurements at incremental depths and note against your water meter. That provides you a good context of volume at different levels.