New Build in NE Alabama
- Thread starter andy81563
- Start date
- Jun 1, 2018
- 13,747
- Pool Size
- 26000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
- Jun 1, 2018
- 13,747
- Pool Size
- 26000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
Have you already purchased the swcg?
Any chance you could swap it out for a T15 cell?
Add all your other equipment to your signature as well.
www.google.com
Any chance you could swap it out for a T15 cell?
Add all your other equipment to your signature as well.
Create Your Signature - Further Reading
www.google.com
Concerning backfill...The dirt I have removed, as you can see, is good old Alabama red clay, with lots of chirt mixed in. Is this completely unusable for backfill if I am careful to place it and compact it well? Or do I need to completely fill with crushed limestone? I am also going to use the Z pool forms to pour the cantilever coping.
- Jun 1, 2018
- 13,747
- Pool Size
- 26000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
Clay takes a loooong time to settle so it’s not a good choice for back fill.
Here’s a thread on the backfill subject
www.troublefreepool.com
Here’s a thread on the backfill subject
What to use to backfill around a steel wall vinyl liner inground pool?
Hello everyone. I got it in my head to put an inground pool in my house, and I was lucky to find this group....I am hoping someone can guide me on what to use to backfill around the walls (I purchased a steel wall vinyl liner inground pool) . I am attempting to price out the installation cost ...
www.troublefreepool.com
Understand the settling issue. I will backfill with crushed limestone. Does anyone have experience with building a pour in place sun ledge and steps that are vinyl covered?
- Jun 1, 2018
- 13,747
- Pool Size
- 26000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
Here’s one sunshelf build that I found - not diy but well documented
www.troublefreepool.com
@duraleigh may have some good insights for you on your diy vinyl journey
Upstate NY Sharing our dig
Hi Everyone. I have been reading all this wonderful information on TFP. I thought I should start sharing our pics. I'll save you the drama behind the "seen" I just laugh about them. So our dig started May 17th... Some Pool specs: 18' x 38' IG 18' x 6' Sunshelf/toddler shelf w/ two steps down...
www.troublefreepool.com
@duraleigh may have some good insights for you on your diy vinyl journey
