Need some help with a New Intellicenter wiring for the main control Upper part of the box.

[Turbo1Ton]

@Jimrahbe - I'm not sure on the SuperFlo pump as there is no mention of a SuperFlo in the Intellicenter instructions, but I would assume this is just comms, same as the IntelliFlo.



@BAYA - Neither of those is power, they are both communications. Connect to either com port terminals J4 or J5, on the yellow and green terminals. Make sure you turn off the control power first.

--Jeff

 

[BAYA]

Thanks Jeff for the clarification

 

[Jimrahbe]

B,

Is that just a cable from home depot or is it an actual SuperFlo VS cable P/N 356324Z.. it should be Black.???

One end of the cable should have a connector that connects the cable to the SuperFlo contol head. The other end just has wires.

The tan cable is for the older SuperFlo VS.

Thanks,

Jim R.

 

[BAYA]

J,
That's a cable I got from a local pool distributor and authorized pentair seller. It's true you mentioned Black so I would have to wait till Monday to clarify that but for sure one end has the connector and the other 2 cables

 

[Jimrahbe]

B,

If you bought it from a Pentair guy, it should have a P/N.. What is the actual P/N?

I think they sold you the cable for the old SuperFlo VS.

Thanks,

Jim R.

 

[BAYA]

J,
Answering your question they didn't charge me for the cable which is great and yes it's not the latest cable but the tech guys figure out how ti make it work since they had so many left. So there is a mark that tells you the specific way one end gets connected to the ump with that sharpie mark looking up the just making sure at the other end Yellow goes with Yellow and Orange with Green. Thanks for the feedbacks

 

[BAYA]

Here is a picture