Just found my IC40 with no lights on. I keep reading about a fuse but do not have the separate power box for the SWG. My connection goes directly from the SWG to the main Pentair panel. There isn’t a gray plastic cap with screwdriver slot anywhere on the bottom of my panel. I cannot find published ANYWHERE where the fuse would be. My pool was installed May 2016 on the GA coast. Have had the usual problems with this system but it’s actually been running great this summer. Now this!
Better not need a new IC40 after 3 yrs. My pool is only 10k gallons. Appreciate any helpful advice ;-)
Better not need a new IC40 after 3 yrs. My pool is only 10k gallons. Appreciate any helpful advice ;-)