My Heated Intex Prism 18x48 setup

[Nitrojedi]

i might have went a bit overboard for a Intex setup but hopefully it was worth it , I built my pool on a 24x20 pad made from 3/4” horse stall mats , I purchased the largest Intex pump and SWG they offer, a Hayward Pro Series 50,000 BTU Variable speed heat pump, Vinylworks sliding ladder with a custom 3D printed frame mount to secure it . We wired the heat pump with a plug as my garage is less then 8’ away , I want to be able to take it down easily. I still need to finish the landscaping and cleanup , but as of today everything is working, pump. Has no issue triggering the heat pump

 

[Nitrojedi]

Custom 3D printed ladder bracket

 

[GJones]

Looks great!! That heat pump is crazy! I would probably go that route if the electricity in California was not so stupidly expensive lol. Just keep an eye on your saltwater generator. Don't trust its built-in salt meter get your own tester. The biggest issue with that generator is Code 91. Mine threw that code after about 1 year. There is no fix for it so you can do like I did and bought an outdoor 12V/3A-10A adjustable power supply. Then wire up the connectors that plug into the salt cells to the new power supply and your saltwater generator will work just fine. Happy swimming!

 

[Nitrojedi]

Thank You, Heat pumps are stupidly cheap to operate , even in California

Looks great!! That heat pump is crazy! I would probably go that route if the electricity in California was not so stupidly expensive lol. Just keep an eye on your saltwater generator. Don't trust its built-in salt meter get your own tester. The biggest issue with that generator is Code 91. Mine threw that code after about 1 year. There is no fix for it so you can do like I did and bought an outdoor 12V/3A-10A adjustable power supply. Then wire up the connectors that plug into the salt cells to the new power supply and your saltwater generator will work just fine. Happy swimming!