So been looking at moving to SWG for years. Well with the freeze. I drained all BUT the Naturepure. Forgot and didnt know. Anyways. Busted and might as well make the move now. I have all Jandy and IAqualink. Pool about 32k. What would everyone recommend moving to? Going to order today.
Moving to SWG- Thanks TX weather for making that choice easy. BUT
- Thread starter chadweiss
- Start date
- Jul 21, 2013
- 65,443
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Get the Jandy Aquapure 1400. A bit undersized for you but the best you can do.
www.troublefreepool.com
Jandy AquaPure SWG - Further Reading
www.troublefreepool.com
Thanks. I failed to mentioned I dont mind going third party and not pulling into my APP
Circupool makes 60k units and so does Pentair. If you don’t have Pentair automation you don’t need to pay the Pentair premium.
I ran my pump and swg 24/7 so there was no need for any kind of automation. It was just ‘on’.
I ran my pump and swg 24/7 so there was no need for any kind of automation. It was just ‘on’.
- Jul 21, 2013
- 65,443
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
- Jul 21, 2013
- 65,443
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
When you have a spa it is nice for automation to lower the SWG generation when in SPA mode so you don’t over chlorinate the smaller body of water.
Makes sense. But also worried it will be undersized. We use the pool a TON in the summer. Hate to run the system longer just because it cant keep up.
- Jul 21, 2013
- 65,443
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
With a VS pump cost you little to nothing to run your pump 24/7 at low RPM to generate the needed chlorine.
Good point. So one other question. So if I already have the Automation Panel/IAQUALINK. I shouldnt need the Aquapure Panel and I can use what I have and just get the replacement kit? AquaPure/PureLink Jandy/Zodiac PLC1400 Replacement Cell KitWith a VS pump cost you little to nothing to run your pump 24/7 at low RPM to generate the needed chlorine.
- Jul 21, 2013
- 65,443
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Ok. So leaning toward the circupool . I dont mind manually moving down production when using the SPA. So question. So which model? The RJs or the Cores? And I am guessing I can tie this into my relay switch on my pump in my Jandy Panel? The RJ 60 and the Core-55 are about the same price.
- Jul 21, 2013
- 65,443
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Depends which one will install easier in your setup.
You read about the differences here - Circupool SWG - Further Reading