Getting a lot of micro bubbles in hotub. Not in pool. We have an air blower, heater and swg. Is there a common problem or a method to figure out what’s causing them?
Micro bubbles
- Thread starter Aksneed188
- Start date
- Apr 10, 2018
- 6,457
- Pool Size
- 18375
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Salt water chlorine generators produce hydrogen gas bubbles. They'll look a lot like champagne bubbles coming from your returns. Try switching off your SWG to make sure this is the source.
After reading some post. I am going to start ht without swg and heater and see what happens. Go from there. What about check valve for blower Could that be a source? Thanks
Ok water is circulating no bubbles. So if I just turn off swg bubbles will go away or will they still be there because fc?
- Apr 10, 2018
- 6,457
- Pool Size
- 18375
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
If you turn off swg, you should see no bubbles after a couple of minutes.