- Feb 16, 2024
- 112
- Pool Size
- 9336
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
I’ve been out of town since earlier this month and got around to testing my FC today. It was at 21.5ppm. The last time I tested it, it had been stable for a month or two at ~12ppm.
My question is, water temp was around the low 80s/high 70s when it was stable at 12ppm. With the water temp now being in the low 60s, is there less chlorine demand and I should be adusting my SWG % lower when the water gets colder to keep around 12ppm?
My question is, water temp was around the low 80s/high 70s when it was stable at 12ppm. With the water temp now being in the low 60s, is there less chlorine demand and I should be adusting my SWG % lower when the water gets colder to keep around 12ppm?