Lights on a schedule with iAqualink 2.0

[nateb]

I've been looking but cannot locate a way to set lights on a schedule with my pda or phone. Does anybody know how? This has to be an option.

 

[kadavis]

Find out which auxiliary controls your lights, then go to schedules and set a on off time for that auxiliary. You can also rename the auxiliary to one of the light names

 

[nateb]

how do I find out which aux control the lights are on..
.read? [emoji52]

 

[superray]

You won't be able to do certain things on the PDA but on your phone in the iAqualink app you would need to click on the "WEB" word in the top right corner and then "Menu" that should bring up the schedules icon to start adding or editing the devices schedules. Your Auxiliaries should have been labeled when the system was setup to correspond to the various relays that power the devices, if not then you need to go into "System Setup" and choose "Label AUX" and go from there.

The Web control is the same screen as when you login through the iAQUALINK web page portal on a PC or tablet instead of the app.

 

[kadavis]

You can also go to the control system, put in service mode the push the auxiliary buttons until you find which one turns on lights

 

[nateb]

Success !!!!