Anyone know the manufacture of this light ring? This pool is aprox 40+ years old. Would like to find new ring.
Light ring
- Thread starter bigred1080
- Start date
- Jul 21, 2013
- 53,109
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Swimquip.. the screws are not OEM; screw holes are likely blown, somebody used fatter white good faceplate screws in it make it work.
Last edited:
Pool Clown
In The Industry
Looks like the contractor that applied the aggregate finish cut the ring off that niche, then re attached it to the surface. You could probably leave it, and install an Aladdin light ring with an American (Pentair) light fixture. Either incandescent or LED.
Pool Clown
In The Industry
Wow, fooled me. Still, same advice. Light ring is probably the least expensive option.
Golf Tees in the screw holes, or liner is going to take a walk with the sealing clamp/ring removed.
Pool Clown
In The Industry
I would leave it just like it is and set the light ring over the whole thing, if it will fit.
