LED waterfalls on a curved feature wall? Water going in different directions...

[bankingdom]

Hey everyone. I'm not sure we or PB thought it out much in the planning stages but we are putting in a feature wall with three 24" sheer decents.

I guess we didn't realize that due to the curve the waterfalls would not be in line and one is sticking out a bit.

Will it look good in the end, or is this crazy?

 

[ajw22]

Really depends what you want.

When water is cascading down the curved walls will not be visible.

How are you capping the ledge? I don’t think the plastic will be that visible if you finish above it nicely.

 

[Turbo1Ton]

Depending on how it is capped, I think it will not be all that noticeable. You might see about finding some plastic paint that is close to the stone color to paint the exposed areas of the sheer, just so it blends in a little better.

--Jeff

 

[bankingdom]

This is what it looks like capped. The left one seems to be the one sticking out the most bc of the curve.

 

[AQUA~HOLICS]

Install the same stack stone (one stone) as the face on the edges of the spillways and have them cut back towards the all ready installed stone at a 45, you can do the same on the bottom lip, this will hide the plastic of the spillway.