Hey fellas, new to the board, would like to take this opportunity to thank you ahead of time as i've been reading these forums for quite some time...
So, onto my predicament.. Just recently bought a house, brand new sta-rite pump and filter.. Everything works fine with the main drain open and the skimmer running.. Just bought a kreepy kruiser vac and have been having problems with air bubbles coming out of the jets.. I've tried the direct vacuum line and the skimmer, same problems.. Here is my list of what I have tried to resolve this...
1. Took filter out of pump
2. Took inline filter out of vacuum hose
3. Adjusted pressure to make sure the suction was in applicable range for the vac
4. Changed out vacuum hoses
5.Tightened pump cap(Again, no bubbles when the vacuum is not running)
I'm not quite sure what else would be letting air into the pump unless I have a faulty unit? I hope someone could shed some insight!! Thanks guys!!
-Chuck
So, onto my predicament.. Just recently bought a house, brand new sta-rite pump and filter.. Everything works fine with the main drain open and the skimmer running.. Just bought a kreepy kruiser vac and have been having problems with air bubbles coming out of the jets.. I've tried the direct vacuum line and the skimmer, same problems.. Here is my list of what I have tried to resolve this...
1. Took filter out of pump
2. Took inline filter out of vacuum hose
3. Adjusted pressure to make sure the suction was in applicable range for the vac
4. Changed out vacuum hoses
5.Tightened pump cap(Again, no bubbles when the vacuum is not running)
I'm not quite sure what else would be letting air into the pump unless I have a faulty unit? I hope someone could shed some insight!! Thanks guys!!
-Chuck