Jandy variable speed pump.

[doughboy62]

How can I adjust the speed of my pump? Do I need a controller? I have a jandy 2.7 e pump.

 

[Jimrahbe]

62,

If your pump does not have a control head that has a display, or buttons, then you must have an app of some type that will control the speed of the pump.

Show us a pic of the pump you have..

Thanks,

Jim R.

 

[doughboy62]

Here is some images.

 

[doughboy62]

62,

If your pump does not have a control head that has a display, or buttons, then you must have an app of some type that will control the speed of the pump.

Show us a pic of the pump you have..

Thanks,

Jim R.

My apologies it took me a minute to figure out how to reduce the images. Lol

 

[Jimrahbe]

62,

It looks like you have an automation system.. Is that true?

If so, the automation should control your pump's speed.. And you should be able to use the automation to change the speed to whatever you want..

I am not a Jandy guy, but if you show us the automation panel, I'm sure we have people here that can get you pointed in the right direction.

Thanks,

Jim R.

 

[doughboy62]

 

[doughboy62]

It is on a mechanical timer.

 

[ajw22]

The Jandy ePump does not come with a control panel. That pump is expected to be connected to a Jandy automation system or you need to buy the JEP-R controller.

The ePump can be operated by one of three (3) controllers: the ePump controller (JEP-R), the AquaLink RS controller (Rev O or later), the AquaLink PDA (Rev 4.0 or later), or the AquaLink Z4 controller.

 

[doughboy62]

Thank you!