Jandy Truclear leaks

[embeleco]

Hello folks.

Just posting here on the SWG conversation. I have the Jandy SWG TrueClear installed when my pool was built around 3 years now. I discover that when I switch the iAqualink to Spa Mode I start seeing water drips below the SWG cell. I don't see any water getting out of the lid (at least not that I can tell).. now if I switch to pool mode .. the water drip just stopped. Not sure since when is doing that.. as we don't do the Spa Mode often. Wondering if too much pressure or if the Filter (the CS Crappy FL Filter) is the culprit.. as I remember when it was new and we used the SPA Mode several times... there was no water drip whatsoever. but again we don't use the SPA mode that much.. Maybe 1-2 times a year.. It was really a waste of money.

Thanks in advance for any feedback.

Moved from here.

 

[HermanTX]

Usually when in SPA mode the pump is running at a higher speed and that increases the system pressure. So it is feasible that a leak in Spa mode and not in Pool mode. Have you tried to turn off the system and inspect where the drip is coming from? That top screws off and you could apply some lube to it. Maybe you can show a photo of where the leak is.