Hello,
First post on this site.
I have a Jandy Aqualink rs4 system. My spa side controller stopped working a while ago and I'm having trouble identifying if it is the Spa Side controller or the control board. I have been searching for a wiring diagram to allow me to test the functionality from the control board. There are six wires that connect to the control board 1-6 with different colors. I'm assuming the red and black are power and ground. The other four would be for each of the pieces of equipment. I would like to use a jumper wire to activate the equipment form the control board directly. What I don't know is what wires I should connect and I don't want to short the board. Any advice on how to determine what wires to jump would allow me to determine if my problem is withteh controller or the board. Thank you
First post on this site.
I have a Jandy Aqualink rs4 system. My spa side controller stopped working a while ago and I'm having trouble identifying if it is the Spa Side controller or the control board. I have been searching for a wiring diagram to allow me to test the functionality from the control board. There are six wires that connect to the control board 1-6 with different colors. I'm assuming the red and black are power and ground. The other four would be for each of the pieces of equipment. I would like to use a jumper wire to activate the equipment form the control board directly. What I don't know is what wires I should connect and I don't want to short the board. Any advice on how to determine what wires to jump would allow me to determine if my problem is withteh controller or the board. Thank you