Jandy pump leaking
- Thread starter 6XSBChamps
- Start date
- Jun 7, 2017
- 9,990
- Pool Size
- 29000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
After checking everything it seems the water is from under here. I assume there’s an O ring in there is I took them apart? I’ve never had to open them. I have been having problems this spring with debris getting through the basket and having to clear out the impeller. 
- Jun 24, 2021
- 16,262
- Pool Size
- 29000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
You need a go-kit which includes all the o-rings and seals.
Post up the model number of the pump here. And we'll help you find the right one.
Post up the model number of the pump here. And we'll help you find the right one.
- Jun 24, 2021
- 16,262
- Pool Size
- 29000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
- Jun 24, 2021
- 16,262
- Pool Size
- 29000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
If it were me, I would also order a US seals PS-1907 and use it for the shaft seal. Keep the one in the go kit as a backup. The SCS are much better shaft seals.
It is pricy, but after two standard seals in a year, I went with the SCS version and haven't had an issue in 4 years.
May be better prices.
It is pricy, but after two standard seals in a year, I went with the SCS version and haven't had an issue in 4 years.
May be better prices.
Similar threads
