- Jul 16, 2018
- 80
- Pool Size
- 38000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
Summer started and I took out my dummy cell and our back my handy salt cell which is brand new and I haven't even usernir yet. I was run ing Chlorine during winter. I installed the cell starter it up and the gauge reading on the sandy is showing 4.8 on the jandy aqua link 1400 model. I started the salt cell and I set the percentage to 55 it’s been one day and I still don’t have any chlorine level. The flow is right the reading it proper and no error codes. It’s works. How long does it take to generate salt to chlorine and why is my level so high to begin with 4.8