Intex ultra xtr pavers are all level but liner has dipped one inch on one side..,

Lucylocket74

Member
Jun 19, 2020
17
Madisonville, TN
Hello all! We’re still in the process of this never ending set up of our Intex Ultra XTR 32 x 16. Our liner/foam padding ground work was all level until this past week of torrential rain and one of the short sides went down about an inch. Fortunately our pavers are unaffected and level all around within 1/16”. Is this a huge issue? The rain water slopes to one side of the liner but thats with only a couple inches of water in the pool. We were hoping to begin filling today. Your help as always is greatly appreciated!
 

Lucylocket74

Member
Jun 19, 2020
17
Madisonville, TN
We used a water level for all the pavers. The foam pad and a little sand under neath it is what is sloping approximately 3 or 4 ft in from the short side. I don’t think the picture will show much, but that’s the ground height difference on each short side comparatively. This forum won’t always let me upload the higher quality photos from my iPhone.
 

Attachments