I have an Intex pool with 4m3 sand filter pump (26644) and a separate salt system (26668)
Both have a build in timer which is not very practical.
You can only set the number of hours to run every day. Once you do, every day on the time you have initially set it, it will start running for the specified nr of hours.
The pump needs to run before and after the salt system starts to operate.
So, if I want my pump to run for 4 hours, The salt system must be setup for less (e.g. 3 hours).
I want my pump to run at night from 2 a.m to 6 a.m. So the setup I need to do:
1) Wake up at 2 a.m. set the filter to run for 4 hours
2) wait 30 minutes and set the salt system to run for 3 hours
After a manual intervention or if I want to change the duration I need to setup it again at night.
Far from ideal.
So here is my question: Can I hookup an external timer (domotica system) and put both in 'full time run' (FP) so my external timer can switch the pump and salt system on and off?
Thank you.
Both have a build in timer which is not very practical.
You can only set the number of hours to run every day. Once you do, every day on the time you have initially set it, it will start running for the specified nr of hours.
The pump needs to run before and after the salt system starts to operate.
So, if I want my pump to run for 4 hours, The salt system must be setup for less (e.g. 3 hours).
I want my pump to run at night from 2 a.m to 6 a.m. So the setup I need to do:
1) Wake up at 2 a.m. set the filter to run for 4 hours
2) wait 30 minutes and set the salt system to run for 3 hours
After a manual intervention or if I want to change the duration I need to setup it again at night.
Far from ideal.
So here is my question: Can I hookup an external timer (domotica system) and put both in 'full time run' (FP) so my external timer can switch the pump and salt system on and off?
Thank you.