Intex 32x16x52 leg holes

[Deweys72]

Just started putting the pool up and the slots for the legs on one side do not line up with the slots for the legs. I have the pole out and took a picture of it and how it is not lining up

 

[kellyfair]

Are you sure you are using correct frame for correct side? If you flip pole where the top end is now at bottom, does that help?

 

[Deweys72]

Are you sure you are using correct frame for correct side? If you flip pole where the top end is now at bottom, does that help?

Nope tried that. Tried calling company but they are only open Monday-Friday

 

[Rushey]

Are you sure you used the right combination of poles? They are not all the same.

 

[Deweys72]

Are you sure you used the right combination of poles? They are not all the same.

Yes the combination is correct. The ends are to be an A or C and the center pieces are Bs

 

[Deweys72]

Are you sure you used the right combination of poles? They are not all the same.

Yes they are correct per the instructions

 

[Deweys72]

It is also only one pole that isn't lining up with the holes. All other sections line up and do the ends and other side of pool.

 

[Deweys72]

I just did some measurements and it seems the holes in that area are not cut at the same measurements as the other side. Would it be safe to cut the holes areas longer to get the holes so I can put the legs on?