Intex 1.25" to 13mm Pipe

[plasteredric]

I have an above ground pool with an Intex pump and I'm wanting to add a DIY solar heater into the loop. I plan on having two loops connected in parallel and I'm hoping someone can advise on what connection pieces I'll need to go from the 1.25" (32mm) intex tubing to two 13mm I/D irrigation tubing coils.

Many Thanks

 

[mknauss]

Welcome to the forum.

Not sure most here would have that type of set up, but let's give this bump to see if anyone has any ideas.

 

[CT-Steven]

Would be so much easier if you used 1/2 poly irrigation tubing (they are very close in size).
If you did, I think you could coble these together (I think it is the black adapter for the 1/2" poly).

1-1/4" x 1/2" Sch 40 PVC Reducer Bushing Flush Style - Spig x Soc 437-166

1-1/4" x 1/2" Sch 40 PVC Reducer Bushing is great for long-term use. Non-corrosive and non-toxic. Place your order online or over the phone.

www.pvcfittingsonline.com

1/2" male pvc x poly tubing insert adapter

Buy 1/2" male pvc x poly tubing insert adapter at Drip Depot for drip irrigation fittings. Free shipping and fast delivery for all your irrigation and plumbing projects.

www.dripdepot.com