Moved from here.. IntelliFlo Power Out Failure Alarm
Hello, and this message is mainly for Jimrahbe, as you have been most helpful up top. I had same issue happen to my VS intelliflo. I checked voltage at PL4 unit, 240v, and then at L1 and L2 of the pump itself, and seems 240v is making it all the way to pump. Still getting Power out failure after about 15 seconds. Thinking i may need to dive into the capacitor... .any ideas or thoughts here before i venture into the pump? Thank you so much for any assistance, as I wish my issue was simply a GFCI, but it seems I will be taking this thread to a deeper level.
Hello, and this message is mainly for Jimrahbe, as you have been most helpful up top. I had same issue happen to my VS intelliflo. I checked voltage at PL4 unit, 240v, and then at L1 and L2 of the pump itself, and seems 240v is making it all the way to pump. Still getting Power out failure after about 15 seconds. Thinking i may need to dive into the capacitor... .any ideas or thoughts here before i venture into the pump? Thank you so much for any assistance, as I wish my issue was simply a GFCI, but it seems I will be taking this thread to a deeper level.
Last edited by a moderator: