looks like I have very similar issue.. how do I check the F/W version.. is it somewhere in the easytouch panel or on the pump itself ?
Intelliflo disconnects from EasyTouch randomly
- Thread starter AZPoolUse
- Start date
- Jul 21, 2013
- 65,367
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
Put the EasyTouch into SERVICE mode and check the pump firmware version on the pump control panel.
What model number pump are we discussing?
Put the EasyTouch into SERVICE mode and check the pump firmware version on the pump control panel.
What model number pump are we discussing?
Thanks. I was able to see it.. it says 3.03
I have Intelliflo VSF .
It says P# 350305 .
Is that the model ?
I have Intelliflo VSF .
It says P# 350305 .
Is that the model ?
Last edited:
- Jul 21, 2013
- 65,367
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
3.03 is one of the bad firmware releases.
Call Pentair Support and make a warranty claim and see how they want to update your pump.
Call Pentair Support and make a warranty claim and see how they want to update your pump.
Similar threads
