- Feb 16, 2021
- 48
- Pool Size
- 13400
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Would you ever consider wiring a NG Heater to the same breaker as the Pump?he Initial install was done by my pool builder and he used the same 240 VAC GFCI breaker to power both the IntelliFlo and the SWCG. I redid the wiring and just left the transformer set up for 240 VAC..
If I ever need to add another breaker, I will have to rewire the SWCG for 120 VAC..
My Heater only uses 2amp on 220 .. and the intelliflo is 16? .. so still good for the 20amp 220 breaker
Just to note.. the Heater has a built-in shut off switch.. where as the swg doesn't... so I understand your thoughts above.. just wondering if you'd still think that way with a heater.