- Dec 26, 2019
- 1,995
- Pool Size
- 14500
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Was trying to heat the spa for the kids tonight. Water temps started at 79F. Reached 87F and stopped. I go out to check it after a while when kids said it wasn't running. Pump had shut off because it lost comms. Reset the system, everything comes back on normal. Switch from Pool to Spa. Heater never tries to fire, after 30secs to a minute, the comms are lost and it shuts everything down. Do this several times, no joy.
Thought maybe they forced an OTA update, but no, still on 1.064. Reset the system and all is well as long as in pool mode. Switch to spa and lose comms.
At a loss for what to check.
--Jeff
Thought maybe they forced an OTA update, but no, still on 1.064. Reset the system and all is well as long as in pool mode. Switch to spa and lose comms.
At a loss for what to check.
--Jeff