So we decided to install an 18 foot round above ground in our back yard. We ordered a semi-above ground so we could backfill part of it as we have a sloping yard. It rained a lot over the weekend and today most of the site where we're placing the pool is dry except for one small area. The area will not be under the bottom frame but will it be OK to install on top of it? We had an excavator come and level it. We are planning on working on the base tonight by adding the sand but was curious about the wet area.
Installing an above ground
- Thread starter Michele7077
- Start date
- Jul 3, 2013
- 9,028
- Pool Size
- 15000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool SJ-40
Welcome to TFP 
It should be fine to install on a wet area.... I guarantee it will get wet after your done
It should be fine to install on a wet area.... I guarantee it will get wet after your done
